Sec. 248-5.1. Vehicle and equipment labeling requirements

(a) For each covered vehicle that has BART installed or that received a waiver pursuant to section 248-4.1(b) and (c) of this Part, a label shall be affixed to the vehicle in plain view in the form of a legible and durable label. Each label shall contain the following information:

(1) For those vehicles that have BART installed:

(i) name of the BART regulated entity or contractor whose vehicle received BART;

(ii) vehicle identification number (if appropriate) and engine serial number;

(iii) specific BART product name installed on the vehicle;

(iv) date of installation of the BART product;

(v) PM reduction classification level number;

(vi) vehicle or engine model year;

(vii) name of the engine manufacturer, family and series;

(viii) engine horsepower; and

(ix) if CARB verified technology, the CARB designated diesel emission control strategy family name;

(2) For those vehicles that have received a waiver pursuant to section 248-4.1(b) and (c) of this Part:

(i) name of the BART regulated entity or contractor receiving the waiver;

(ii) date waiver issued;

(iii) vehicle identification number (if appropriate) and engine serial number;

(iv) vehicle or engine model year; and

(v) name of the engine manufacturer;

In lieu of a waiver label, a copy of the department issued waiver can be kept with the vehicle.

(3) the label shall be maintained in a manner that retains its legibility for the entire life of the vehicle.

(b) For each vehicle that has BART installed, a label shall be placed on/near the fuel fill line of such vehicle stating "use ULSD fuel only" unless the selected BART does not require the use of ULSD.