AAM-07-07-00002-P National Institute of Standards and Technology Handbook 44, 2007 Edition

2/14/07 N.Y. St. Reg. AAM-07-07-00002-P

NEW YORK STATE REGISTER

VOLUME XXIX, ISSUE 7

February 14, 2007

RULE MAKING ACTIVITIES

DEPARTMENT OF AGRICULTURE AND MARKETS

PROPOSED RULE MAKING

NO HEARING(S) SCHEDULED

 

I.D No. AAM-07-07-00002-P

National Institute of Standards and Technology Handbook 44, 2007 Edition

PURSUANT TO THE PROVISIONS OF THE State Administrative Procedure Act, NOTICE is hereby given of the following proposed rule:

Proposed action:

This is a consensus rule making to amend section 220.2(a) of Title 1 NYCRR.

Statutory authority:

Agriculture and Markets Law, sections 16, 18 and 179

Subject:

2007 edition of National Institute of Standards and Technology (NIST) Handbook 44.

Purpose:

To incorporate by reference the 2007 edition of NIST Handbook 44.

Text of proposed rule:

Subdivision (a) of section 220.2 of 1 NYCRR is amended to read as follows:

(a) Except as otherwise provided in this Part, the specifications, tolerances and regulations for commercial weighing and measuring devices shall be those adopted by the [90th] 91st National Conference on Weights and Measures [2005] 2006 as published in the National Institute of Standards and Technology Handbook 44, [2006] 2007 edition. This document is available from the National Conference on Weights and Measures, 15245 Shady Grove Road, Rockville, MD 20850, or the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. It is available for public inspection and copying in the office of the Director of Weights and Measures, Department of Agriculture and Markets, 10B Airline Drive, Albany, NY 12235, or in the office of the Department of State, 41 State Street, Albany, NY 12231.

Text of proposed rule and any required statements and analyses may be obtained from:

Ross Andersen, Department of Agriculture and Markets, 10B Airline Dr., Albany, NY 12235, [phone], e-mail: [e-mail]

Data, views or arguments may be submitted to:

Same as above.

Public comment will be received until:

45 days after publication of this notice.

This action was not under consideration at the time this agency's regulatory agenda was submitted.

Consensus Rule Making Determination

The proposed rule will amend 1 NYCRR section 220.2 to incorporate by reference the 2007 edition of National Institute of Standards and Technology Handbook 44 in place of the 2006 edition which is presently incorporated by reference.

The proposed rule is non-controversial. The 2007 edition of Handbook 44 has been adopted by or is in use in every state other than New York; the State's manufacturers of weighing and measuring devices already, therefore, conform their operations to the provisions of this document in order to sell their products in interstate commerce. Furthermore, the State's users of commercial weighing and measuring devices also already use devices that conform to the provisions of this document due to its nearly-nationwide applicability. The proposed rule will not, therefore, have any adverse impact upon regulated businesses and is, therefore, non-controversial.

Job Impact Statement

The proposed rule will not have an adverse impact on jobs or on employment opportunities.

The proposed rule will incorporate by reference in 1 NYCRR section 220.2 the 2007 edition of National Institute of Standards and Technology Handbook 44 (henceforth, “Handbook 44 (2007 edition)”) which contains specifications, tolerances and regulations for commercial measuring devices. The 2006 edition of Handbook 44 is presently incorporated by reference. Handbook 44 (2007 edition) differs from the 2006 edition in that it amends several requirements for scales, so that such requirements are consistent with international standards; changes requirements for retail motor fuel dispensers; and revises vapor elimination procedures for metering systems mounted on vehicles. Handbook 44 (2007 edition) has been adopted by or is in use in every state other than New York; the State's manufacturers and users of weighing and measuring devices already, therefore, conform their operations to the provisions of this document in order to sell their products in interstate commerce.

The proposed rule will not, therefore, have any adverse impact upon jobs or employment opportunities.