DOS-27-07-00005-E Manufacturer's and Installer's Warranty Seals
7/3/07 N.Y. St. Reg. DOS-27-07-00005-E
NEW YORK STATE REGISTER
VOLUME XXIX, ISSUE 27
July 03, 2007
RULE MAKING ACTIVITIES
DEPARTMENT OF STATE
EMERGENCY RULE MAKING
I.D No. DOS-27-07-00005-E
Filing No. 609
Filing Date. Jun. 18, 2007
Effective Date. Jun. 18, 2007
Manufacturer's and Installer's Warranty Seals
PURSUANT TO THE PROVISIONS OF THE State Administrative Procedure Act, NOTICE is hereby given of the following action:
Action taken:
Addition of Part 1210 to Title 19 NYCRR.
Statutory authority:
Executive Law, section 604(5); L. 2005, ch. 729, section 4
Finding of necessity for emergency rule:
Preservation of general welfare.
Specific reasons underlying the finding of necessity:
This rule is adopted as an emergency measure to preserve the general welfare and because time is of the essence. This rule implements the provisions of Article 21-B (Manufactured Homes) of the Executive Law, which was added by Chapter 729 of the Laws of 2005, and which became effective on January 1, 2006. This rule establishes procedures for obtaining the manufacturer's warranty seals and installer's warranty seals required by Article 21-B of the Executive Law; establishes standards regarding the initial training, certification, and continuing education of manufacturers, retailers, installers, and mechanics of manufactured homes; establishes procedures for the resolution of disputes relating to manufactured homes; and otherwise implements the provisions Article 21-B of the Executive Law. Adoption of this rule on an emergency basis preserves the general welfare by permitting the continuation of all aspects of the manufactured housing industry in this State without interruption.
Subject:
Obtaining and attaching manufacturer's warranty seals and installer's warranty seals to manufactured homes; certification of manufacturers, retailers, installers, and mechanics of manufactured homes; and administrative procedures for resolution of disputes relating to the construction, installation, or servicing of manufactured homes.
Purpose:
To implement art. 21-B of the Executive Law, as added by chapter 729 of the Laws of 2005.
Substance of emergency rule:
Chapter 729 of the Laws of 2005 added Article 21-B (Manufactured Homes) of the Executive Law. This emergency rule has been adopted to implement the provisions of Article 21-B. This rule establishes procedures for obtaining and the manufacturer's warranty seals and installer's warranty seals which must be attached to manufactured homes. This rule establishes the qualifications for certification of manufacturers, retailers, installers, and mechanics of manufactured homes. This rule establishes administrative procedures for resolution of disputes relating to the construction, installation, or servicing of manufactured homes. This rule also establishes fees relating to warranty seals, certifications, approval of instructional providers and approval of courses.
This notice is intended
to serve only as a notice of emergency adoption. This agency intends to adopt this emergency rule as a permanent rule and will publish a notice of proposed rule making in the State Register at some future date. The emergency rule will expire September 15, 2007.
Text of emergency rule and any required statements and analyses may be obtained from:
Joseph Ball, Department of State, 41 State St., Albany, NY 12231, (518) 474-6740, e-mail jball@dos.state.ny.us
Regulatory Impact Statement
1. STATUTORY AUTHORITY.
The statutory authority for this rule is section 4 of Chapter 729 of the Laws of 2005, which provides that the Department of State (the Department) is authorized and empowered to take such steps, including the promulgation of rules and regulations, as may be necessary for the proper implementation of Article 21-B of the Executive Law (hereinafter referred to as “Article 21-B”), and section 604(5) of the Executive Law, which provides that the Department has the power and duty to promulgate rules and regulations relating to the provisions of Article 21-B.
Article 21-B was added by Chapter 729 of the Laws of 2005, and took effect on January 1, 2006. Rules similar to this rule were adopted on an emergency basis on December 22, 2005, March 22, 2006, June 20, 2006, September 18, 2006, December 18, 2006, and March 19, 2007. Those rules have expired. This rule, which will be effective on the date of filing, implements Article 21-B.
2. LEGISLATIVE OBJECTIVES.
Article 21-B was enacted for the purpose of ensuring that manufactured homes are installed and serviced in a professional manner; ensuring that disputes regarding the manufacture, installation, and servicing of manufactured homes be resolved fairly and expeditiously; providing a degree of security for the payment of legitimate claims; and otherwise implementing the provisions of the federal Manufactured Housing Improvement Act of 2000 (PL 106-569). The Manufactured Housing Improvement Act of 2000 requires States to enact requirements for the licensing or certification of installers of manufactured homes, training, dispute resolution, and other matters relating to manufactured homes. Article 21-B requires manufacturers and installers to attach warranty seals to manufactured homes installed in this State, requires manufacturers, retailers, installers, and mechanics to be certified by the Department, and requires the Department to provide administrative procedures for the resolution of disputes.
This rule establishes procedures for obtaining and attaching the warranty seals required by Article 21-B; establishes standards for certification as a manufacturer, retailer, installer, or mechanic of manufactured homes; establishes administrative dispute resolution procedures; and establishes fees.
3. NEEDS AND BENEFITS. This rule establishes procedures regarding manufacturer's and installer's warranty seals. These procedures are necessary to implement the warranty seal provisions of Article 21-B. These provisions permit manufacturers and installers to obtain the warranty seals, specify the manner in which and place where the warranty seals are to be attached, establish the fees to be paid by manufacturers and installers for obtaining the warranty seals, and establish the maximum fees that can be charged by manufacturers and installers for attaching the warranty seals.
This rule establishes qualifications and procedures for obtaining certification as a manufacturer, retailer, installer, or mechanic. These qualifications and procedures are necessary to implement the certification provisions of Article 21-B. The qualifications established by this rule include minimum experience and education requirements for retailers, installers, and mechanics; initial training requirements for installers and mechanics; and continuing education requirements for all classes of certificate holders. These provisions in this rule will benefit purchasers of manufactured homes by helping to ensure that homes will be installed in a professional manner.
This rule requires each certificate holder to file a deposit account control agreement evidencing the existence of a deposit account which is maintained with a financial institution and which is pledged to the Department, a letter of credit, or a surety bond (provided, however, that a person holding a limited certificate will not be required to file his or her own deposit account control agreement, letter of credit, or surety bond if he or she is covered by his or her employer's deposit account control agreement, letter of credit, or surety bond). These financial responsibility requirements will benefit owners of manufactured homes by providing a measure of assurance that legitimate claims relating to the delivered condition, installation, service, or construction of a manufactured home will be satisfied.
The rule establishes procedures for the resolution of disputes involving the delivered condition, installation, service or construction of manufactured homes. These procedures are necessary to implement the dispute resolution provisions of Article 21-B. These procedures will benefit manufacturers, retailers, installers, mechanics, lending entities, and manufactured home owners by permitting expeditious and cost-effective resolution of disputes.
The rule establishes fees, as required by Article 21-B. The fees will defray the cost of administering Article 21-B.
4. COSTS.
a. Cost to regulated parties for the implementation of and continuing compliance with this rule:
This rule will require manufacturers and installers to obtain warranty seals to be attached to manufactured homes. Manufacturers will pay $125 per seal. Installers will pay $35 per seal if they request 5 or fewer, or $25 per seal if they request 6 or more. This rule will also permit manufacturers and installers to charge purchasers a fee for attaching such seals; such fees will cover the manufacturer's and installer's costs of obtaining the seals and an additional sum (between $15 and $25) to cover anticipated administrative expenses.
This rule will require manufacturers, retailers, installers, and mechanics to be certified by the Department. The fee for certification for a period of 2 years will be $200 for manufacturers, retailers, and installers, and $100 for mechanics. However, a person employed by a person who or a business entity which is certified may apply for a limited certificate, which is valid only while such person is acting within the scope of his or her employment by his or her certified employer. The fee for a limited certificate will be $25 for the 2-year term of the limited certificate.
A certified party must also file a deposit account control agreement, letter of credit, or surety bond with the Department (provided, however, that person who holds a limited certificate will not be required to file his or her own deposit account control agreement, letter of credit, or surety bond if he of she is covered by the deposit account control agreement, letter of credit, or surety bond filed by his or her employer). The Department estimates that the premiums to be paid for surety bonds having terms of 2 years will be between $800 and $1,200 for the $50,000 surety bond to be filed by a manufacturer, between $400 and $600 for the $25,000 surety bond to be filed by a retailer, approximately $200 for the $10,000 surety bond to be filed by an installer, and approximately $200 for the $5,000 surety bond to be filed by a mechanic. The Department estimates that the fee for obtaining a letter of credit will typically be 1% of the face amount of the letter of credit per year, subject to a minimum fee of $100 per year; this indicates that the fee for a $50,000 letter of credit will be $500 per year (or $1,000 for 2 years), the fee for a $25,000 letter of credit will be $250 per year (or $500 for 2 years), the fee for a $10,000 letter of credit will be $100 per year (or $200 for 2 years), and the fee for a $5,000 letter of credit will be $100 per year (or $200 for 2 years).
A person certified as an installer will be required to complete 16 hours of initial training prior to certification, and a business entity certified as an installer will be required to employ at least one person who has completed such initial training and who is certified by the Department. The Department estimates that the fees that will be charged by instructional providers who provide such initial training will be between $200 and $300.
A person certified as a mechanic will be required to complete 6 hours of initial training prior to certification, and a business entity certified as a mechanic will be required to employ at least one person who has completed such initial training and who is certified by the Department. The Department estimates that the fees that will be charged by instructional providers who provide such initial training will be between $100 and $125.
A person certified as a manufacturer, retailer, installer, or mechanic will be required to complete 3 hours of continuing education every 2 years, and a business entity certified as a manufacturer, retailer, installer, or mechanic will be required to employ at least one person who has completed such continuing education and who is certified by the Department. The Department estimates that the fees that will be charged by instructional providers who provide such continuing education will be approximately $50.
A private trade association or other entity applying for approval as an instructional provider will be required to pay $100 once every 2 years. An approved instructional provider applying for approval of a course it wishes to provide will be required to pay $50 plus $5 for each student who takes the course.
b. Costs to the Department:
The Department anticipates that the cost to the Department to administer the programs contemplated by Article 21-B will be approximately $490,000 per year. Those costs include the costs associated with the 5 employees that the Department anticipates it will need to administer the programs. The costs of administering Article 21-B are largely attributed to the statute and not significantly to this implementing rule.
c. Costs to other State agencies:
This rule does not impose any costs on other State agencies.
d. Cost to local governments:
This rule does not impose any costs on local governments.
5. PAPERWORK.
Under this rule, manufacturers and installers will be required to file written requests for warranty seals; manufacturers will be required to file quarterly reports of homes completed; installers will be required to file quarterly reports of installations preformed; manufacturers, retailers, installers, and mechanics will be required to file written applications for certification and for periodic renewal of certification; a private trade organization or other entity wishing to provide initial training or continuing education will be required to file a written application for approval as an instructional provider and for periodic renewals of such approval; approved instructional providers will be required to file written applications for approval or courses to be provided; and instructional providers will be required to file reports of each course presented. It is the intention of the Department to develop and implement request, application, and report forms, to post such forms on the Department's web page, and otherwise to make such forms freely available to regulated parties.
6. LOCAL GOVERNMENT MANDATES.
This rule does not impose any duty on local governments.
7. DUPLICATION.
The Department is not aware of any relevant rule or other legal requirement of the State or Federal government which duplicates, overlaps or conflicts with this rule.
8. ALTERNATIVES.
The Department has not considered any significant alternatives to this rule.
9. FEDERAL STANDARDS.
The Department is not aware of any instance in which this rule exceeds any minimum standards of the federal government for the same or similar subject areas.
10. COMPLIANCE SCHEDULE.
This rule can be complied with immediately. Rules substantially similar to this rule have been in effect since December 22, 2005. Previous versions of this rule established the qualifications for certification, and provided regulated parties with the information necessary to apply for and obtain the required certification prior to the date certification was first required (July 1, 2006). Previous versions of this rule also included transitional provisions, as required by section 3 of Chapter 729 of the Laws of 2005, that permitted installers and mechanics to obtain certification prior to completion of the initial training requirements that otherwise would apply. This rule continues, without substantial change, the qualifications for certification first established on December 22, 2005.
Summary of Regulatory Flexibility Analysis
1. EFFECT OF RULE.
This rule applies to all persons and all business entities who manufacture, sell, install, or service manufactured homes, including all small businesses that manufacturer, sell, install, or service manufactured homes. The Department of State estimates that this rule will apply to approximately 268 small businesses engaged in the retail selling of manufactured homes and approximately 100 small businesses engaged in the installation manufactured homes for buyers. This rule will also apply to small businesses that “service” (i.e., modify, alter or repair the structural systems of) manufactured homes; however, the Department of State is unable to determine at this time the number of small businesses that service manufactured homes. This rule will also apply to any small business that manufactures or produces manufactured homes. The Department of State estimates that this rule will apply to approximately 36 manufacturers; however, the Department of State believes that few, if any, of such manufacturers are small businesses.
This rule does not apply directly to local governments. However, this rule does specify that no certificate of occupancy shall be issued for any manufactured home installed on or after January 1, 2006 unless the required warranty seals have been attached to the home. This provision will affect every local government that issues certificates of occupancy.
2. COMPLIANCE REQUIREMENTS.
This rule requires manufacturers and installers of manufactured homes to obtain warranty seals from the Department of State, and to attach the warranty seals to manufactured homes that are installed on or after January 1, 2006. (The rule specifies certain situations in which a manufacture's warranty seal is not required.)
This rule requires manufacturers and installers to file quarterly reports with the Department of State.
This rule requires each person and each business entity that manufactures, sells, installs, or services manufactured homes to obtain certification from the Department of State. The qualifications for obtaining and retaining certification include (1) the filing of a surety bond, letter of credit, or deposit account control agreement; (2) having have at least a high school education, or the equivalent; (3) satisfying specified experience requirements; (4) satisfying specified initial training requirements; (5) in the case of an installer or mechanic, passing a written examination; and (6) satisfying specified continuing education requirements. In addition, a certified manufacturer must be approved by the United States Department of Housing and Urban Development to construct manufactured homes.
Each certified business entity must employ at least one certified person.
At least one person certified by the Department of State as an installer must be present at the home site during the installation or a manufactured home.
At least one person certified by the Department of State as a mechanic must be present at the home site during the performance of any service.
Any person or business entity owning or operating more than one manufacturing plant that manufactures, delivers, or sells manufactured homes in the State of New York shall be required to obtain a separate certification as a manufacturer for each such manufacturing plant.
Any person or business entity owning or operating more than one retail sales location in the State of New York shall be required to obtain a separate certification as a retailer for each such retail sales location.
This rule establishes requirements for approval of instructional providers.
This rule provides that no governmental agency or department or other person or entity responsible for issuing certificates of occupancy in any jurisdiction shall issue a certificate of occupancy for any manufactured home installed in such jurisdiction at any time on or after January 1, 2006 unless the manufacturer's warranty seal has been attached to such manufactured home (unless such manufacturer's warranty seal is not required by reason of an exception set forth in the rule) and the installer's warranty seal has been attached to such manufactured home.
3. PROFESSIONAL SERVICES.
Professional services are not likely to be required to comply with the reporting, record keeping and other requirements of this rule.
4. COMPLIANCE COSTS.
Manufacturers will be required to pay $125 for each manufacturer's warranty seal, and will be permitted to charge up to $150 for attaching a seal to a manufacture home.
Installers will be required to pay between $25 and $35 for each installer's warranty seal, and will be permitted to charge up to $50 for attaching a seal to a manufacture home.
The initial cost of obtaining certification will include (1) the cost of obtaining the required surety bond, letter of credit, or deposit account control agreement, (2) the certification fee to be paid to the Department of State, and (3) in the case of certification as an installer or mechanic, the cost of the required initial training. The Department of State estimates that the initial cost of obtaining certification as a manufacturer will be between $1,000 and $1,400, the initial cost of obtaining certification as a retailer will be between $600 and $800, the initial cost of obtaining certification as an installer will be between $600 and $700, and the initial cost of obtaining certification as a mechanic will be between $400 and $425.
A person applying for a limited certificate is not required to provide his or her own surety bond, letter of credit, or deposit account control agreement. In addition, the fee to be paid to the Department of State for a limited certificate is lower than the fee to be paid for a corresponding non-limited certificate. The Department of State estimates that the initial cost of obtaining limited certification as a manufacturer or retailer will be $25, the initial cost of obtaining limited certification as an installer will be between $225 and $325, and the initial cost of obtaining limited certification as a mechanic will be between $125 and $150.
The cost of maintaining certification will include (1) the cost of renewing the required surety bond, letter of credit, or deposit account control agreement, (2) the renewal fee to be paid to the Department of State, and (3) the cost of the required continuing education courses. The Department of State estimates that the cost of maintaining certification as a manufacturer will be between $1,050 and $1,450 every 2 years (or between $525 and $725 per year), the cost of maintaining certification as a retailer will be between $650 and $850 every 2 years (or between $325 and $425 per year), the cost of maintaining certification as an installer will be $450 every 2 years (or $225 per year), and the cost of maintaining certification as a mechanic will be $350 every 2 years (or $175 per year).
A person holding a limited certificate will not incur the expense of renewing his or her own surety bond, letter of credit or deposit account control agreement. In addition, the fee to be paid to the Department of State to renew a limited certificate will be less than the fee to be paid to renew a corresponding non-limited certificate. The Department of State estimates that the cost of maintaining limited certification in any category (manufacturer, retailer, installer or mechanic) will be $75 every 2 years (or $37.50 per year).
The foregoing compliance costs are not likely to vary significantly by reason of the size of the business.
Local governments are not likely to incur any costs in complying with this rule.
5. ECONOMIC AND TECHNOLOGICAL FEASIBILITY.
The Department of State will print the warranty seals required by this rule. The Department of State intends to prepare the application forms that will be required by this rule, and to posts such forms on the Department's web page and otherwise make such forms freely available to the regulated parties. The Department of State believes that it will be economically and technologically feasible for small businesses to comply with this rules.
6. MINIMIZING ADVERSE IMPACT.
It appears that the Legislature intended that purchasers of manufactured homes be afforded the full measure of the consumer protections contemplated by Article 21-B without regard to the size of the businesses involved in the manufacture, sale, installation, or servicing of the home. Further, the Department of State is not aware of any information suggesting that compliance with this rule will be significantly more difficult for small businesses than for it will be for larger businesses. Accordingly, this rule makes no special provisions for small businesses.
7. SMALL BUSINESS AND LOCAL GOVERNMENT PARTICIPATION.
The Department of State has solicited comments from the manufactured home industry, including manufacturers, retailers, and installers, and from the insurance industry, and the Department of State will continue to solicit comments from those industries.
The Department of State will notify code enforcement officials throughout the State and other interested parties of the adoption of this rule by means of a notice in Building New York, a monthly electronic news bulletin covering topics related to the Uniform Code and the construction industry which is prepared by the Department of State and currently distributed to approximately 3,700 subscribers representing all aspects of the construction industry. In addition, the Department of State will post the full text of this rule on the Department's website.
Rural Area Flexibility Analysis
1. TYPES AND ESTIMATED NUMBERS OF RURAL AREAS.
This rule implements Article 21-B of the Executive Law. Both Article 21-B and this rule apply uniformly throughout the State, including all rural areas of the State.
2. REPORTING, RECORD KEEPING AND OTHER COMPLIANCE REQUIREMENTS.
This rule requires manufacturers and installers of manufactured homes to obtain warranty seals from the Department of State, and to attach the warranty seals to manufactured homes that are installed on or after January 1, 2006. (The rule specifies certain situations in which a manufacture's warranty seal is not required.) The seals are to be requested in writing, on a form to be supplied by or otherwise acceptable to the Department of State.
This rule requires manufacturers to file quarterly reports with the Department of State specifying, with respect to each manufactured home completed by the manufacturer during the reporting period covered by such report, the type or model of such manufactured home and, if applicable, the name and address of the retailer to which such manufactured home was delivered. The quarterly reports are to be filed on forms provided by or otherwise acceptable to the Department of State.
This rule requires installers to file quarterly reports with the Department of State specifying, with respect to each manufactured home installed by the installer during the reporting period covered by such report, the location where such manufactured home was installed, the owner of such manufactured home at the time of installation, the type or model of such manufactured home, the manufacturer of such manufactured home; and the written certification of the installer that the installation of such manufactured home meets the standards of the New York State Uniform Fire Prevention and Building Code. The quarterly reports are to be filed on forms provided by or otherwise acceptable to the Department of State.
This rule requires each person and each business entity that manufactures, sells, installs, or services manufactured homes to obtain certification from the Department of State. Applications for certification are to be in writing, on forms provided by or otherwise acceptable to the Department of State. The qualifications for obtaining and retaining certification are summarized in paragraph 2 of the Regulatory Flexibility Analysis for Small Businesses and Local Governments.
This rule requires any private trade association or other entity wishing to provide initial training courses or continuing education courses to apply to the Department of State for approval as an instructional provider. This rule requires approved instructional providers to apply to the Department of State for approval of each course it proposes to provide. All applications are to be submitted in writing, on forms provided by or otherwise acceptable to the Department of State. Instructional providers are required to keep records showing the date and location of each course presentation and the names and addresses of each student taking the course, and to file reports showing such information with the Department of State.
This rule provides that no governmental agency or department or other person or entity responsible for issuing certificates of occupancy in any jurisdiction shall issue a certificate of occupancy for any manufactured home installed in such jurisdiction at any time on or after January 1, 2006 unless the manufacturer's warranty seal required by this rule has been attached to such manufactured home (unless such manufacturer's warranty seal is not required by reason of an exception set forth in the rule), the installer's warranty seal required by this section has been attached to such manufactured home, and the governmental agency or department or other person or entity responsible for issuing certificates of occupancy has independently determined that such manufactured home has been installed in accordance with the applicable provisions of the New York State Uniform Fire Prevention and Building Code.
Professional services are not likely to be required in rural areas in order to comply with the reporting, record keeping and other compliance requirements imposed by this rule.
3. COSTS.
Manufacturers will be required to pay $125 for each manufacturer's warranty seal, and will be permitted to charge up to $150 for attaching a seal to a manufacture home.
Installers will be required to pay between $25 and $35 for each installer's warranty seal, and will be permitted to charge up to $50 for attaching a seal to a manufacture home.
The initial cost of obtaining certification will include (1) the cost of obtaining the required surety bond, letter of credit, or deposit account control agreement, (2) the certification fee to be paid to the Department of State, and (3) in the case of certification as an installer or mechanic, the cost of the required initial training. The Department of State estimates that the initial cost of obtaining certification as a manufacturer will be between $1,000 and $1,400, the initial cost of obtaining certification as a retailer will be between $600 and $800, the initial cost of obtaining certification as an installer will be between $600 and $700, and the initial cost of obtaining certification as a mechanic will be between $400 and $425.
A person applying for a limited certificate is not required to provide his or her own surety bond, letter of credit, or deposit account control agreement. In addition, the fee to be paid to the Department of State for a limited certificate is lower than the fee to be paid for a corresponding non-limited certificate. The Department of State estimates that the initial cost of obtaining limited certification as a manufacturer or retailer will be $25, the initial cost of obtaining limited certification as an installer will be between $225 and $325, and the initial cost of obtaining limited certification as a mechanic will be between $125 and $150.
The cost of maintaining certification will include (1) the cost of renewing the required surety bond, letter of credit, or deposit account control agreement, (2) the renewal fee to be paid to the Department of State, and (3) the cost of the required continuing education courses. The Department of State estimates that the cost of maintaining certification as a manufacturer will be between $1,050 and $1,450 every 2 years (or between $525 and $725 per year), the cost of maintaining certification as a retailer will be between $650 and $850 every 2 years (or between $325 and $425 per year), the cost of maintaining certification as an installer will be $450 every 2 years (or $225 per year), and the cost of maintaining certification as a mechanic will be $350 every 2 years (or $175 per year).
A person holding a limited certificate will not incur the expense of renewing his or her own surety bond, letter of credit or deposit account control agreement. In addition, the fee to be paid to the Department of State to renew a limited certificate will be less than the fee to be paid to renew a corresponding non-limited certificate. The Department of State estimates that the cost of maintaining limited certification in any category (manufacturer, retailer, installer or mechanic) will be $75 every 2 years (or $37.50 per year).
Such costs are not likely to vary significantly for different types of public and private entities in rural areas. An installer who requests fewer than 6 installer's warranty seals at a time will be required to pay $35 per seal, or $10 per seal more than an installer who requests at least 6 warranty seals at a time. In addition, the fee for a letter of credit or premium for a surety bond may be dependent, in part, on the location of the business for which the letter of credit or surety bond is issued.
4. MINIMIZING ADVERSE IMPACT.
It appears that the Legislature intended that purchasers of manufactured homes be afforded the full measure of the consumer protections contemplated by Article 21-B without regard to the location of the businesses involved in the manufacture, sale, installation, or servicing of the home. Further, the Department of State is not aware of any information suggesting that compliance with this rule will be significantly more difficult for regulated parties located in rural areas than for it will be for regulated parties located in suburban or metropolitan areas. Accordingly, this rule makes no special provisions for regulated parties located in rural areas.
5. RURAL AREA PARTICIPATION.
The Department of State has solicited comments from the manufactured home industry, including manufacturers, retailers, and installers, and from the insurance industry, and the Department of State will continue to solicit comments from those industries, including representatives of those industries located in rural areas.
The Department of State will notify code enforcement officials throughout the State, including those in rural areas, and other interested parties of the adoption of this rule by means of a notice in Building New York, a monthly electronic news bulletin covering topics related to the Uniform Code and the construction industry which is prepared by the Department of State and currently distributed to approximately 3,700 subscribers representing all aspects of the construction industry. In addition, the Department of State will post the full text of this rule on the Department's website.
Job Impact Statement
The Department of State has determined that this rule will not have a substantial adverse impact on jobs or employment opportunities.
This rule establishes the procedures for obtaining and attaching the manufacturer's warranty seal and installer's warranty seal required by Article 21-B of the Executive Law, the fees to be paid by the manufacturer and installer to obtain the warranty seals, and the maximum fees that may be charged to the customer for attaching the warranty seals to the manufactured home. The maximum fee that may be charged to a customer for attaching the required seals will be $200. The typical delivered and installed cost of a manufactured home in this State is approximately $70,000. Therefore, the cost of the warranty seals will be less than 0.3% of the cost of a home, and the statutory requirement that warranty seals be attached, as implemented by this rule, should not have a substantial impact on the market for manufactured homes or on jobs or employment opportunities in the manufactured home industry.
This rule also establishes procedures for determination of certain disputes regarding manufactured homes by the Department of State. Article 21-B directs the Department of State to establish such procedures. It is anticipated that by providing for administrative determination of disputes, this rule will reduce the litigation expenses for all parties involved in such disputes. Therefore, the statutory requirement that the Department of State provided for administrative resolution of disputes, as implemented by this rule, should not have a substantial impact on jobs or employment opportunities in the manufactured home industry.
This rule also established the qualifications for obtaining certification as a manufacturer, retailer, installer, or mechanic of manufactured homes. A person or business entity applying for certification will incur the following costs:
(1) Generally, the cost of obtaining a certification will be $100 per year in the case of a manufacturer, retailer, and installer, and $50 per year in the case of a mechanic. However, a person who is employed by a person who or a business entity which is certified may apply for a limited certification, which is valid only while such person is acting within the scope of his or her employment by his or her certified employer; the cost of obtaining such a limited certificate will be $12.50 per year.
(2) Installers and mechanics may be required to pay fees to the instructional providers who present the initial training courses required for certification, and all certificate holders may be required to pay fees to the instructional providers who present the continuing education courses required to maintain certified status.
(3) Generally, each certificate holder will be required to file a deposit account control agreement, letter of credit, or surety bond. Those certificate holders who file a letter of credit will be required to pay fees to the financial institutions that issue such letters of credit, and those certificate holders who file a surety bond will be required to pay premiums to the insurance companies that issue such bonds. However, the holder of a limited certificate will not be required to file a deposit account control agreement, letter of credit, or surety bond, provided that his or her certified employer has filed an acceptable deposit account control agreement, letter of credit, or surety bond.
It is anticipated that the total cost of certification, instruction, and bonding will be relatively modest, particularly when these costs are spread over all the units manufactured by a certified manufacturer, sold by a certified retailer, installed by a certified installer, or serviced by a certified mechanic, during the course of a year. Therefore, the statutorily mandated certification process, as implemented by this rule, should not add a significant sum to the total cost of a manufactured home in this State, and should not have a substantial impact on jobs or employment opportunities in the manufactured home industry.
